The newest version of the eurorack classic, the Toppobrillo Multi-Filter!
Multi-filter 2 is a fully featured state variable multi-mode filter with an acidic sound. It features two audio inputs with a voltage controlled crossfader to mix them, v/oct tracking cutoff, Individual Low-pass Band-pass and Hi-pass outputs as well as a variable output (continously variable from Low-pass to High-pass with either Notch or Bandpass in the middle, selectable by switch - try feed an output back to the VC Mode input for more squelch!) Also features VC Resonance and PING input for pinging the filter - great when using the filter as an oscillator or adds an accent in a more regular patch.
Multi-filter 2 is a great filter for acid sounds or for experimenting with more west-coast type techniques.
Features:
- Dual input crossfading mixer with voltage controlled gain and saturation.
- Dedicated "Ping" input percusses the filter.
- Variable Mode output: continuously-variable voltage controlled response with selectable NP (Notch) or BP at center.
- Variable response can track frequency for some interesting sweep variations and modulation options.
- Voltage controlled resonance, or "Q".
- Self-oscillates reliably over entire range- doubles as a very playable audio source or LFO with multi-phase outputs.
- Tracks V/OCT over roughly 4 octaves.
- Fully buffered outputs and low noise design.
- Shallow form-factor.
Specifications:
12HP
45mA @ +12V
45mA @ -12V
0 mA @ 5V
20 mm deep
