0HP Modules are passive circuits you can use to add utility without adding another module!
The 0HP VCA/ AND acts like a faucet: When a high control voltage is present, the input is allowed to flow to the output. When there is a low control voltage, the flow is restricted and nothing is present at the output. Using a high speed optocoupler, the module accepts audio at all inputs so audio-rate amplitude modulation is possible for pseudo-ring modulation effects. When used with gates at both the input and the CV input, the module acts as a logical AND gate (an AND gate outputs a high voltage when both of the inputs are high.) A built in trigger converter outputs spike whenever the main output transitions from low to high.
Whether you need some extra utilities for your studio behemoth or you need to save space on the road, 0HP gives you options. These modules come as a small circuit board mounted to a colorful piece of laser cut plexiglass, with a small chance to get one of our fabulous rare colors.
DISCLAIMERS:
Since the modules are passive, some signal loss and distortion should be expected. The user is expected to keep cables away from the top of the circuit board. While in 99.9% of cases an accidental short circuit is not an issue, Mystic Circuits, Eli Pechman or any of our retailers assume NO RESPONSIBILITY for modules that are accidentally damaged by doing so. This expectation follows same logic as not plugging an output into another output or touching your cables to the panels, which are common safety practices expected to be followed by the end user.