This is the third generation of Intellijel’s much loved Korgasmatron filter designed in collaboration with David G. Dixon. Dual Multi-mode filters that track v/oct and create a clean sine wave while self oscillating, featuring serial and parallel and crossfading modes and special overdrive circuit!
Features
- Analog self-oscillating, crossfading, six-mode dual filter.
- Three FM inputs for each filter: One with 1V/OCT pitch tracking, one with a unipolar attenuator, and one with a bipolar attenuverter.
- Serial or Parallel signal flow.
- Overdrive distortion modelled after the Proco Rat guitar pedal.
The Morgasmatron features two completely independent six-mode filters (labeled “A” and “B”) — each with its own mode-select knob, input, output, cutoff, resonance, Q-drive and gain control. Each filter has a pair of CV inputs (one with a built-in attenuator and the other with a built-in attenuverter) for modulating cutoff, and another CV input for modulating resonance. Both filters self-oscillate at maximum Q, and produce pitched sine waves that track the two separate 1V/OCT inputs.
You can use the two filters independently of one another, or you can use them together (in either a series or parallel connection) and smoothly crossfade between them using either the XFADE knob or the XFADE CV input and built-in attenuverter. You can flip the DRY switches to instantly bypass either or both filters; invert the phase of Filter B; or overdrive Filter A by switching on the new Overdrive circuit. A MIX output provides (as you might suspect) a mixed output of the two filters.
Specifications:
Width 20HP
Depth 38mm
Power:
113mA @ 12V
102mA @ -12V
Morgasmatron Manual
Note: This is a used item, and while it is guaranteed to be fully functional it is almost sure to also contain "rack rash" on the mounting holes and have some minor scratches on the panel from use. It will include a ribbon cable, m3 screws, and a box, but not the original box.
