Mix 3 is a three channel mixer with VCAs on every channel - there is also a fourth unity input and a vca on the output. The knobs control output level until CV is patched, and then they become CV attenuators, making Mix 3 a great space saving solution for a final vca and mixer. Mix 3 is also designed to have a pleasing sound when overdriven, and has jumpers on the back to attenuate the output to line level, allowing you to skip an output module.
Additional features include audio indicator LEDs, a fourth auxiliary input, voltage control over the output level and a line output jumper setting.
Features:
- Analogue audio signal mixer with three high-end DC-coupled voltage controlled channels.
- Control knobs become attenuators when CV inputs are used.
- Symmetrical clipping yields pure distortion tone.
- White indicator LEDs with audio response for quick signal identification.
- Additional 'D' direct unity gain inverting input.
- Jumper allows selection between standard or lowered (−20 dB) output level, for direct connection to line inputs.
- Precision-milled 2 mm anodised aluminium front panel with high-resolution, non-erasable graphics.
- Bullet-proof design: polarised power header and MOSFET protection circuit.
- Includes 16-to-10-pin Eurorack power ribbon cable.
- Premium mounting hardware: black screws, black nylon washers and matching hex key.
- High-quality components and assembly; designed and made in Belgium.
Specifications:
6 HP
+12: 30 mA
−12: 25 mA
Note: This is a used item, and while it is guaranteed to be fully functional it is almost sure to also contain "rack rash" on the mounting holes and have some minor scratches on the panel from use. It will include a ribbon cable, m3 screws, and a box, but not the original box.
