8 Channel Switched Multiple!
Module has 8 I/O Jacks, each with a switch that can be set to Bus A, Bus B, or Off. All channels set to the same Bus are passively connected, a bit like a stackcable. This allows one flexibility in the channel count of the two mults - they could be 1 in 3 out each, or one can be 1 in 4 out and the other 1 in two out, or it could be used as a single 1 in 7 out mult etc. Also allows quick re routing or muting of several inputs to two destinations (perfect for clocks and triggers.) Per Doepfer:
Module A-182-1 is a simple passive multi-connector similar to the multiples modules A-180-1/A-180-2. In contrast to modules A-180-1/2 each socket is equipped with a 3-position switch that allows to connect the corresponding socket to the internal bus #1 (left position), bus #2 (right position) or to turn the socket off (center position).
Examples:
- all switches in left position or all switches in right position: 8-fold multiple
- four switches in left position and four switches in right position: two 4-fold multiple
- X switches in left position, Y switches in right position and Z switches in center position: two separate multiples with some sockets turned off
Specifications:
6hp
20mm depth
Totally passive, no power required!
Note: This is a used item, and while it is guaranteed to be fully functional it is almost sure to also contain "rack rash" on the mounting holes and have some minor scratches on the panel from use. It will include a ribbon cable, m3 screws, and a box, but not the original box.
