Prss Pnt is a tactile pressure sensitive button module for playing or clocking your synthesizer by hand! Outputs a touch gate, a toggle/flip flop gate for ON/OFF behavior, a pressure voltage with response knob, and a slewed pressure voltage that can extend the pressure voltage for long smooth slow modulation.
The basic function of PrssPnt will be familiar to anyone who has used Pressure Points or 0-CTRL. It could be seen as a single “souped-up” channel of one of these devices. Since it is a single channel, the tuned voltage outputs are not relevant, and instead are replaced with more playable sensitivity controls and alternate pressure and gate outputs.
Features:
- Momentary Gate output remains high as long as it is being pressed
- Toggled Gate output goes high and low with each successive press of the plate: press it to make it go high, press it again to make it go low
- Pressure output generates a positive control signal proportional to the amount of Pressure applied, further tailored by the Sensitivity Panel Control
- Smooth Touch Function recreates the useful patch of sending a Pressure Output through a carefully tuned slew limiter for extended function generation
- Turning up the Slew amount will allow for larger than life functions with very long decay to be generated by hand.
- All four outputs available simultaneously
Specifications:
Width: 4hp
Max Depth
(incl. power cable): 30mm
Power:
14mA @+12V
0mA @-12V